TS-07 Error Code Brother Printer
We depend on printing so much on every day basis that we don’t even realize how this simple activity has become an integral part of our lives.
Brother printers are designed to be a sturdy piece of technology to give you a strong performance every time you use them. But there are times when they face errors due to some internal or external issues. At such occasions running to technician is not always feasible. Therefore we advise you to back yourself up with DIY troubleshooting methods. This article is written just for that purpose. We will discuss ‘Brother printer error ts-07’ here.
Causes 59.70TS-07 Error Brother Printer Machine
Causes:
Let us first understand the causes behind this error. By understanding the causes you can handle the error complications in a much deeper level, and also it is good for maintaining your device for future use too. So without wasting any time, let us look at the reasons:
- This error occurs when your Brother printer is not able to detect any WLAN access point or the router.
Troubleshooting Brother Printer Error TS-07
Let us fix Brother Printer Error TS-07:
Troubleshooting Brother Printer Error is quite straight forward. Make sure you follow the below mentioned instructions in the order as they are given:
Solution:
- First of all make sure that your WLAN access point or the router must support the WPS or AOSS. You can check it either by looking for the icons displayed on the router or you can look through the documents that were provided with your router or the WLAN access point.
- Now you need to configure the wireless setting using WPS or AOSS.
- Now place your Brother printer within the range of your router or WLAN access point for an undisturbed internet connection.
- Please make sure there are no ‘signal emitting’ objects such as microwave or cell phones, around your printer or the router as they may disturb the signals or your router or WLAN access point.
- Press ‘Menu’ on your printer.
- Choose network and then press OK.
- Look for the WLAN network with the help of the arrow key on your printer and then select it. And then click on ‘OK.’
- Look for WPS/AOSS option and then select it and click on ‘OK.’
- If you see the message- ‘WLAN Enable?’ choose ‘accept’ option. This will disable the wired network setting.
- If you see ‘Network I/F switched to Wireless’ message, then click on ‘OK’ option. This will disable the wired network setting.
- In case you see ‘Enable WLAN?’ message, then select ‘OK’ option. This will disable the wired network setting.
- Hold the WPS or AOSS button on the WLAN access point or the router for a while. The duration of holding the button may differ based on your WLAN access point or router.
- Press ‘OK.’ At this step your Brother printer will automatically select which mode your WPN access point or router uses and it will configure accordingly.
- On your printer’s LCD screen you will see a WLAN report and the same will be automatically printed.
The Scope of Services:
- The above steps should help you resolve ‘Brother printer error ts-07’, but you may still need some technical assistance.
- To help you in need, our Brother Technical Support team for resolutions is always available.
- You can feel free to connect with our experts at any hour of the day as and when required on Printer Support Phone Number.
- You can opt to either chat with us live or email us as per your convenience.
- You can also call us on
for a customized service on your issues.
