0XC18A0206 Error Code HP Printer
When it comes to printing documents, HP printers are one of the most trusted devices. A majority of organizations have HP printers installed in their premises for printing functions.
Of course, the brand is quite reliable but there are scenarios where sudden errors restrict the printing process. Well, there many error codes that have been recorded when it comes to HP Printer Error, one of them being the HP printer error 0XC18A0206.
Troubleshooting Steps HP Printer Error 0XC18A0206
Description
The HP printer error 0XC18A0206 arises due to Ink System Failure in your printer model.
Recommended Actions
Some users directly jump to advanced technical solutions to get rid of the error. However, there are some steps to be tried before considering the advanced solutions. Such steps are mentioned below:
- Perform a hard reset on the printer
- Ensure printer is connected directly to the wall outlet and through a surge protector
- Remove all the ink cartridges and then perform hard reset on the printer
- Disconnect the power cord from the rear part of the printer while the printer is turned on
- Unplug the power cord from the wall outlet
- Remove USB cable, if any
- Wait for 2-3 minutes
- Press the power button on the printer and hold it for 30 seconds. This will remove additional charge
- Plug the power cable straight to the wall outlet
- Plug the power cord to the printer
- Turn on the printer
- Insert the ink cartridges
- Try test printing to check if it works properly
Fixing HP Printer Error 0XC18A0206
There are two options that you can opt for when it comes getting rid of the HP Printer Error 0XC18A0206.
Solution 1
- Press * and # together
- Press 1, 2, and 3. The support R0632M gets displayed
- Press > to get information menu display
- Press > to get configuration menu display
- Click OK to get hardware failure status display
- Click OK to get failure status: clear
- Click OK to clear
- Press Cancel
- Press Cancel
- Press Cancel
- Now turn off the printer, unplug power cord for two minutes
- Plug it again and turn on the printer
Solution 2
- Disconnect the USB cable
- Make sure the printer is on
- Remove the cartridges
- Wait for the Insert Cartridges message to display on the Control Panel
- Disconnect the power cord from the backside of the device
- Wait for 60 seconds
- Reconnect the power cord, If the product is not turned on automatically, press the ON button
- Reinsert the cartridges
- Close the open doors on the product, if any
- Reconnect the USB cable
- Try printing
Scope of Services
- We make sure we stand by your side in even the worst technical issues that you may face.
- We have opened multiple telephone lines that connect you to the people at our tech support helpdesk.
- Connect Printer Technical Support Help desk team for resolutions consists of skilled employees who resolve your issues as soon as you reveal your technical issues to them.
- You can connect with our representatives via our live chat interface or through emails
You can call us on 
and discuss your problems at any hour of the day.
