TS-02 Error Code Brother Printer
Brother printing technology adapts changes and pushes itself to your modern day printing needs. As a result it is an integral part of our homes and offices.
We depend on them so much that any minor error can greatly affect our day. Printers often end up showing errors because of internal or external reasons and also due to gradual wear and tear. These errors are coded in alphabets and numerical digits. To understand them one needs technical insight. For that very purpose, this article is written. We will discuss ‘brother printer error ts-02’ in this article.
Causes TS-02 Error Brother Printer Machine
Causes:
Let us first understand the reasons behind Brother Printer error to handle the troubleshooting methods in a deeper way and to maintain the printer device in a better way for the future use:
- When your printer is not able to detect the WLAN access point.
- Another reason for this error to pop up is when the printer is unable to detect router.
- A bad USB connection with the router can be another reason for this error.
Troubleshooting Brother Printer Error TS-02
Let us troubleshoot brother printer error ts-02:
Troubleshooting this error can be done with the help of a few solutions. Please make sure that you follow the steps in the exact order as they are mentioned below:
Solution 1:
As a first solution, please make sure the WLAN access point or the router is switched on. When you switch the router on, give it a while to establish all the functions before you expect an internet connection.
Solution 2:
If you are connecting your printer through Wi-Fi mode try switching the connection to direct connection with the help of cables and cords. Please ensure the following points while establishing a direct connection:
- Firstly thoroughly check the cables and the cords that connect to your printer to your printer and the router. Look for any parts that are damaged, torn, or broken.
- Are you using a universal serial bus cable (USB) a hi speed cable? You should do so if your PC or laptop needs a hi-speed interface connection.
- Also, please ensure that the ports on the printer, your laptop or the PC, and on the router are in good shape.
Solution 3:
Other tips to ensure that this error gets resolved are as follows:
- Router emits signals at certain strength. These signals can be disturbed due to distance, number of devices using the connection and due to the presence of any other device that emits signals that can disturb the router’s signals. Therefore in order to avoid router signal issues make sure of the following points:
- Please ensure the router; the printer and your PC are placed in each other’s vicinity while checking the connection issue. Place the printer within one meter range of your router while you configure the wireless settings.
- While sorting out the wireless setting try to decrease the number of devices that are connected to the router.
- Please keep signal emitting devices such as microware, mobile phones away from your router.
The Scope of Services:
- The above steps should help you resolve ‘brother printer error ts-02’ but you may still need some technical assistance.
- To help you in need, our Brother Printer Technical Support team for resolutions is always available.
- You can feel free to connect with our experts at any hour of the day as and when required on Printer Support 800 Phone Number.
- You can opt to either chat with us live or email us as per your convenience.
- You can also call us on
for a customized service on your issues.
