32 Error Code Brother Printer
Having a hard copy of the important information, memories, and projects in your hands is still very important aspect even though the modern word is heavily dependent of the internet and cloud storage.
Yet there are times when your printer fails to process your print commands due to some internal or external issues and even due to worn out parts of your printer. The printer talks about the issues in the form of coded errors which are difficult to interpret if you are not technically well versed. In order to back you up with the troubleshooting methods for such errors, this article has been written. So let us discuss ‘Brother Printer error 32.’
Causes 32 Error Brother Printer Machine
Causes:
When your printer shows this error it is important to understand the causes of it before jumping into troubleshooting methods because it helps you to deal with the error at a much deeper level and it gives you a better sense of maintaining your device for the future use. Let us look at the reason:
- When any paper or any label gets stuck into your Brother printer it ends up in Brother Printer Error.
Troubleshooting Brother Printer Error 32
Let us fix this error:
To resolve this error message please follow the given solutions. Please make sure you follow them in the order mentioned below:
Solution:
- Firstly switch off your printer by pressing the power on/off button on your printer.
- Open the front cover by pressing the front cover release button.
- You will now see the drum unit.
- Hold the green handle and carefully pull it out till it allows.
- Release the gray lock lever which is situated on the left side of the printer.
- Now again hold the green handle and this time pull the drum unit completely out of the machine.
Note:
- Hold the drum unit with the green handle and never touch the sides of the drum unit.
- Do not touch the electrodes inside the machine to prevent yourself from static electric shock.
- Place the drum unit on a clean disposable paper as there are chances of any toner ink spilling on the surface where you will place the drum unit.
- Carefully inspect the insides of the printer. If you find any paper bits, scrapes of paper, labels, dust etc, please remove them.
- Now remove the four ink cartridges from the drum unit. You can do so by holding the handles of the toner cartridges and pulling them out carefully.
Note: Carefully place the cartridges on clean disposable paper as there are chances of any toner ink spilling on the surface where you will place the cartridges.
- Now inspect the cartridges installation areas for any paper bits, stuck scrapes of paper, labels, dust etc. Check the openings of the cartridge area, black rollers, left hand side and the right hand side of the drum unit area, and the waste toner box.
- Reinstall the drum unit and the four cartridges back into the printer and take a test print and start using the printer normally.
Scope of Services:
- The above steps should help you resolve the ‘Brother Printer error 32’, but you may still need some technical assistance.
- To help you in need, Printer Technical Support team for resolutions is always available.
- You can feel free to connect with our experts at any hour of the day as and when required.
- You can opt to either chat with us live or email us as per your convenience.
- You can also call us on
for a customized service on your issues.
