79 Error Code HP Printer
No matter how important soft copies are, it is sometimes mandatory to have a hard copy for future use.
HP Printer is a device that helps you to print whatever document you want to keep for further use. However, when you click Print, there are instances where you come across a common HP Printer Error With A Message that reads: “79 Service Error.” This error restricts your printer from taking the print out of the documents in the queue.
Causes 79 Error Message HP Printer
Cause
It is quite a common error that you may get while attempting to take the hard copy of any document that is saved on your PC. The main cause of this error is the malformation of PostScript documents.
Try These
Before you jump to the technical solutions to resolve the error, it is recommended to try the following first. The below-mentioned points may help you get rid of the issue:
- Locate the switch on/switch off point on the bottom of the printer
- Toggle the switch to OFF position and Count to 10
- Switch on the printer again and the system should start working
Requirements
In case, the HP printer error 79 continues to occur even after trying the above initial steps, you need to go for technical solutions. To ensure your technical solutions work well against the error, you must have:
- An Internet connection
- An Admin account for your PC
Troubleshooting Steps HP Printer Error 79
Fixing HP Printer Error 79
When you decide on applying the technical solutions to fix the Hp printer error, there are two stages that you may need to go through. These include:
Stage 1
This is the stage that involves the logging in of users for the removal of the printing device. The steps to be followed are listed as under:
- Turn off the power of your printer
- Make sure to remove all connections of your printer with every PC that can access it in that network
- You’re not allowed to Cancel the printing process in the domain network. Check See what is Printing option there
- Log in with that account and remove the printing process from there
- Close the tab after the completion of the step
- Switch on the printer now
Note: If you are unable to Cancel the printing process even after following Step 4, you must remove the printer and add it again.
This stage is many a time enough to resolve the error. In case, the error persists, follow the next stage.
Stage 2
This stage marks the downloading, updating, and installing of the new Drivers for your printers. The steps or instructions that you require following are listed below:
- Restart your printer. Make sure only the Power cord is attached
- As soon as the printer starts, connect an Ethernet Cable from the printer with the cable modem or DSL or switch or the router
- Go to the network icon present on your printer screen
- Check if your printer is authenticated to network & lists to an IP address
- Run the firmware update once the printer is connected to the network
- Click on your Settings tab
- Select LaserJet Update & Check for Updates
- Click the Update & Download & Install option there
- After the installation, connect the USB cable back to your printer. Your error is resolved and the device starts working.
Scope of Services
- Though the steps are jotted for your reference to help you resolve the HP printer error 79, you may need some technical assistance from experts.
- To help you in need, our HP Printer Technical Support team for resolutions is always available.
- You can connect with our experts at any hour of the day as and when required.
- You can either chat with us live or email us. You can also call us on
for a detailed discussion on your issues.
