Functional & Technical Error Brother Printer
Printing is undeniably an important part of this heavily internet dependent life. No matter how many soft copies we save, a hard copy has its own importance, and value.
There are a few times though when taking a print out becomes difficult due to errors that your Brother printer shows. Showing errors is your printer’s way of indicating at the underlying problem that can be a result of an internal or external issue or even at the wearing out of any part of your printer. Understanding these errors needs a technical understanding. Exactly for that purpose this article has been written for you.
We will discuss ‘Brother Printer error codes’ in this article.
Causes Technical Error Brother Printer Machine
Causes:
There can be several reasons behind your Brother printer showing errors. By understanding the reasons behind the error you come at a better position of handling the issue at hand and become better able to maintain your machine is smarter way for the future use. Let us look into the reasons:
- Paper jam can cause errors in your printer.
- Another reason is too high temperature of the machine.
- Internal problems with the print head.
- Sometimes due to paper feed issues you can get errors.
- Problems with printer scanner, sensor, and main PCB can also cause issues.
Troubleshooting Brother Printer Tehncials Error
Let us fix the Brother printer error codes
Following are a few solutions based on error types. Please make sure you follow the steps in the order as mentioned below:
Solution 1:
When you Brother Printer show any error ranging from number 30 to 39, 3C and 3F, it means there is a paper jam in your printer. Follow these steps to resolve this category of errors:
- When paper jam occurs, then firstly press the cancel button on your printer to stop any running print job.
- If the paper has got stuck in the input tray, then carefully and gently remove it from there. Don’t rush into this step as you might tear the paper which can get stuck in the machine. Therefore, hold the paper from its two corners with both of your hands and then slowly pull it out.
- If there are any torn pieces of paper, then remove them carefully.
- After clearing the paper jam, place a new set of sheets on the input. Make sure the paper bundle is clear from any curls, folds, dirt, or any abrupt physical characteristics that can cause harm to your printer. It should lay flat on the tray and should be within the maximum paper holding capacity of the tray.
Solution 2:
Other tips to get rid of general errors are as follows:
- Always prefer to connect your printer to a direct wall outlet instead of using surge plugs.
- If your PC or laptop needs a high speed interface, then you must choose a high speed universal serial bus (USB) cable for it.
- Always place your printer within the range of your router and away from any signal emitting devices such as microwaves and cell phones etc.
The Scope of Services:
- The above steps should help you resolve the Brother Printer Error codes, but you may still need some technical assistance.
- To help you in need, our Printer Support team for resolutions is always available.
- You can feel free to connect with our experts at any hour of the day as and when required.
- You can opt to either chat with us live or email us as per your convenience.
- You can also call us on
for a customized service on your issues.
