HP Officejet 7610 “Missing or Failed Printhead” Error

September 6, 2021

HP provides several all-in-one color inkjet printers to their users for better and smart printing, scanning and copying. HP Officejet 7610 is an efficient printer of the HP series. Sometimes users face errors like “Missing or Failed Printhead” while working on their HP Officejet 7610 printer. This error makes users very frustrated when they are not able to print any document. It is a serious and problematic issue. If you are also running with such an issue, then you don’t need to worry and waste your time just take a look at this article for the solution to this error.

Main causes/reasons behind the error 

When the Printhead is not properly installed, then it produces the error of “Missing or Failed Printhead’’.

  • The clogged or obstructed ink cartridge is also one of the reasons for this error.
  • Incorrect installation of Ink cartridge leads to the error of missing or failed Printhead.
  • Faulty Printhead is another reason for the error of missing failed Printhead.
  • This error occurs mostly when the old ink cartridge is replaced with a new cartridge.
  • An outdated printer driver is one of the reasons for this issue. 

Ways and methods for resolving the error

You can fix the error of missing or failed Printhead in your HP Officejet 7610 printer by following all these steps:

Step1: Reseat the Printhead 

  • Open the cartridge access door by pulling the slot at the left side of the printer to reset the hp printers Printhead 
  • Disconnect the power cord from the back of the printer to ensure that carriage is moved or not.
  • Now on the right of the carriage, lift the latch-up.
  • Remove the Printhead from the carriage but don’t remove entirely.
  • Place the Printhead firmly back into the carriage to reset the printer.
  • To close the cartridge access door pull the carriage latch down.
  • Now turn on your printer.

Step2: Update printer firmware

  • To update HP printer firmware open the software and driver download page for the HP printer in a browser. Click on printer and type model number, after that click on the submit option.
  • Now click on firmware, then after that click on the download option.
  • Save your file. In order to start the installation process, you need to open the file.
  • Once the hp printer update window opens, check the serial number on display.
  • Select the checkbox if serial number display and after that click on the update option.
  • To update firmware select the printer model and press on send firmware option.
  • Click on the OK option once the update is complete.

Step3: Clean the Printhead

  • Check your Printhead if switching ink cartridges doesn’t work. Ensure that your Printhead isn’t stuck. Clean your Printhead manually if you can remove it.
  • Load plain and white paper into the paper tray.
  • To select the setting, press down arrow in the control panel, and after that click on OK.
  • To select tool, press down arrow and now press ok.
  • To select clean Printhead, press down arrow, and then press completed now. Take a sample to print a page to ensure that error is resolved            

Step 4: Replace the ink cartridges

  • If there is any defect on the print quality so replace the ink cartridge. For example, any magenta color bars are faulty then replace it. After replacing ink cartridges 
  • The printer will prompt you to print an alignment page.
  • Turn on your printer.
  • Wait for a minute until the printer is idle.
  • Now open the ink cartridge access door and then promptly replace the ink cartridge.
  • To remove the plastic wrap from the ink cartridge pull up the orange tab.
  • After that you need to rotate/twist the cap until it break.

In this post we explained How to fix HP Officejet 7610 “Missing or Failed Printhead” error, hopefully it is useful now we are discussed another problem which is related to the HP Printer click now for more info- Fixing Printing Blank Pages Issue On HP Printers

Missing or failed Printhead in Windows 7, 8, or 10

This error occurs on Windows 8 as well as Windows 7 and 10. You have seen above the solution and reason for this error. You can solve the error “missing or failed Printhead” in HP Officejet 7610 by following all the above steps. If you are not able to fix this issue by the above steps on window 7, 8, or 10 then you can contact the technical support team of the hp printer.

Technical support for the error “Missing or failed Printhead” in HP Officejet 7610 Printer 

If in case you still encounter the same error then you can contact the HP technical customer support team . A team of skilled experts will analyze the persisting issue and provide the best solution. For more assistance and help over product related services, you can use the HP virtual assistant feature or you can visit the official website of the HP.

Other Issues And Errors