Fix Canon Printer Error 5200 on Pixma MP 490 & mx 340 & 350 Canon

Canon printers are very efficient and easy-to-use printers which offers smart functionalities and advanced featured through which you can operate your daily tasks easily and more systematically. However it’s a machine and may prone to errors. In which the one is error code 5200. This error code is usually occurs when you try to print. This may hinder your tasks and also results in the work delay.

Causes behind canon MX340 printer error 5200

The main and important causes behind the printer error 5200 are as follows:

One of the most possible causes of the canon printer error is the connection between the printing device and the computer. So, first determine whether the transmission USB cable is working properly or not.
Drivers are outdated or corrupted. There is certain chanced that the printer driver are configured incorrectly.
When a canon printer displays orange indicator flashing, this usually defines that there are certain internal complications with the toner or ink cartridges
The default error is triggered when users are not able to set up their new printing device properly or any other printer as the default device on your machine, this problem can also be caused by certain issues within the windows registry.
When there is low ink level inside the toner or ink cartridge is the cause of canon printer error.
Defective or problematic ink cartridge
Certain technical complications within the printer printhead.

READ ALSO: CANON PRINTER INSTALLATION FOR WINDOWS, MAC OR WITHOUT CD

Some handy ways to resolve the error code 5200

Method 1- As a primary hack, you need to reboot your printing device and verify if it helps to resolve the error or not. Follow these instructions given below:

First you need to turn “OFF” the printer.
Once the devices are turned off, take out the power cable from the device.
Leave the printing device for not least 15 minutes.
Now again connect the power cord to the printer’s rear and then to the main electrical socket.
Once done, now you need to turn it ON again and wait until it will get ready to print.

Once canon device boots up check whether the canon printer error 5200 has been removed from the device or not.

Method 2- verify the device

Turn off the device and open the front cover of the printer. Then, make an attempt to locate the cartridge access door.
After finding it, try to open the cartridge access; try to take out all the ink cartridges carefully.
Now, place them on a flat surface. Leave the device idle for about 10-15 minutes and then carefully reinsert the ink cartridges back to their location.
Once done, now you need to again plug-in the power cord to the printer’s rear.
Then press and hold the power button to turn it ON.

Method 3- Run the printer troubleshooter tool

First, click on the ‘’Start’’ icon to launch the “Start’’ menu.
After that you need to visit “settings’’ tab.
Now from listed options, you need to click on the “Devices “option.
Then click on the ‘’Printers and scanners’’ option> use drop-down list to get you printer’s name.
Once done, now hit the right-click on it to select ‘’Manage” tab.
Then Select ‘’Run the Troubleshoot” button and stick to the instructions that appear on the display screen.

Method 4- Reset the printer

Firstly, turn on the printing device and proceed to tap on the ‘’Menu ‘’ icon to launch the window.
Now use the directional arrow keys for making desirable changes in the setup menu.
Then select the “Device settings” and hit the ‘’OK’’ to continue.
Now under “device settings” > you need to use the drag-down menu to choose “Reset” option.
Then follow each pop-up instruction that prompt on the screen.
Once done with the reset procedure, now check whether the error is still persists or not.

Technical support

In case you don’t find any satisfactory solution from the above mentioned steps then you can contact the experts team. You will get the exact answer from the hand of CANON PRINTER Repair experts to the printer-related query.