Error code “0x61000012d” is a common error that consistently occurs in HP Officejet Pro X476dw. It is a little problematic issue and quite a handful. This error code requires a manual effort of shifting the print shaft. Many users were frustrated when the error “0x61000012d” displayed on HP Officejet Pro X476dw while working on that printer. To fix this issue you could either turn off your system or restart it again. If you are also facing the error “0x6100002d” in HP Officejet Pro X476dw, take a look at this article where all the reason and solution of error “0x6100002d” are given. Get more info

Reason behind Error “0x6100002d” in HP Officejet Pro X476dw

The following are the main reason behind the error “0x6100002d” in HP Officejet Pro X476dw:

This error occurs generally in HP Officejet Pro X476dw when the worm wheel is locked which results in the up and down movement of the head cartridge.
This error occurs when the head position is upward which results in printer failure “0x6100002d”.
Another reason for the error “0x6100002d” due to faulty motor.

Read More-: Hp Deskjet 3520 Printer Does Not Print Black

How to fix Error “0x6100002d” in HP Officejet Pro X476dw

Time needed: 10 minutes

You can fix this error by the below steps:

Step : Adjust the Pick Tire Shaft
☑ Initially press the power button to turn off the printer.
☑ To avoid injury from electric shock ensure that you have turned off your printer and disconnect it.
☑ Slide the paper tray out of the printer till it stops printing.
☑ Now lift the front of the paper tray and make it out of the printer.
☑ If the white bushing at the end of the pick tire shaft is not properly installed on the shaft then the printer reports error code 6100002D and 6100002E.
☑ Now the shaft may move back and forth excessively.
☑ To make adjustments and amendments easily pull the shaft outside the printer.
☑ Now rotate the shaft in the printer.
☑ Locate white bushing at the end of the shaft.
☑ Slowly slide the white bushing towards the end of the shaft if the white bushing is not installed properly on the shaft.
☑ To keep the shaft stationary hold the shaft close to the pick tire steadily with one hand.
☑ To slide white bushing into place using a screwdriver.
☑ Now you need to carefully reinsert the paper tray back into its appropriate position.
☑ Once completed the above steps, now you need to again plug-in the power cord into the printer’s rear and then to the main electrical socket.
☑ After that, restart your printer and again check for the same.
Step : Check Connection on the Formatter
☑ Firstly start the printer and then unplug the power cord from the printer’s rear.
☑ Disconnect the USB wire.
☑ Now you need to carefully remove the output bin.
☑ Disconnect the thumbscrew and after that pull up the access cover.
☑ Now disconnect two thumbscrews at the back of the printer.
☑ Grab the formatter assembly handle at the front of the printer.
☑ Now pull the formatter out of the printer.
☑ To ensure that formatters are seated properly check all the connections on the formatter.
☑ Put the formatter into a slot at the front of the printer.
☑ Fasten rear thumbscrew at the back of the printer.
☑ Reinstalled the access cover and put the bin.
☑ Reconnect the USB wire or power cable.
☑ After that you need to restart the printer again

Printer Error Code “0x6100002d” on window 7, 8 or window 10 in HP Officejet Pro X476dw

The printer error “0x6100002d” occurs on window 7 or 8 when the worm wheel is locked. It also came in window 10 due to a change in head position. Because of faulty motor error code “0x6100002d” arises in window 7.All the solution to resolve this error is given in this article. You can follow the above instructions carefully to resolve this issue. If still, this error persists on your window 7, 8 and window 10 so you may need to replace the internal printhead. For more insight and details contact the technical customer support team of HP printers.

The given article is useful, and you are easily understand how to resolved HP DeskJet printer2549 issue. If still you have any query so connect with our HP experts and click now for another useful post-: HP Deskjet Printer2549 Says It Is Offline But It Isn’t

Technical support for Error Code “0x6100002d” troubleshooting

If you’re still facing some problems then you can reach the technical support team of HP (HP Experts) . You can go to this website https:// Support.hp.com/in-en/contact/printers to resolve your issue. On this website, all the solutions related to the HP error are given. You can also go to the website to solve all your printing issues https:// Support.hp.com/ in-en/topic/ diagnostic? Category=printing. On this website, all the printing diagnostic solutions are given. You can also ask the solution to your problem from a virtual agent. Their technicians are always ready for your help and their service is available 24/7.