Epson Printer Error Code 031008

November 18, 2020

Epson error code 031008 is the most general error that users are encountered. While using the Epson printer’s device, it largely arises due to the immodest insertion of the ink cartridges. Epson printer users can come across this error during an on-going printing process. Error 031008 is a very problematic issue. This error can come any time when users are printing any document. The error code 031008 can create a break in the printing session.

Reason behind the error code 031008

  • If the ink cartridge is not installed properly, Epson printer error code 031008 might grows up during an on-going printing session. Low ink cartridges are the main reason for print quality issues.
  • When users overload the paper tray, a paper jam occurs and it leads to a 031008 error.
  • When a user connects their printer to their computer by a USB cable, then it leads to the Epson error 031008. It mostly occurs due to broken or damaged USB cable.
  • Due to the use of incompatible cartridges, the printer cannot print and it leads to a 031008 error.
  • A defective printer driver is a common reason for this issue.
  • A low toner level in cartridges is another reason for this error.

Some simple methods to resolve Epson printer error code 031008.

If the user’s printer is running with this error and user’s are unable to resolve it on their own, so to fix this error try to follow the steps which are given below:-

Step-1:- Restart the printer.
Once when you restart the printer you might be shocked knowing that most of the printer error code vanish.

  • Firstly remove the power cable from the power outlet.
  • Now, click on the power button and hold it for a minute.
  • Then plug in the power cable from the power outlet.
  • When you see the printer is turned on, leave the power button immediately.
  • To check whether that error is fixed or not take a print sample.

Step-2:- Printer reset.
Printer reset is indeed intricate and it involves a series of complicated processes. Remember that a small mistake can destroy the device and damaged the entire work process. In order to reset the printer, you need to follow the listed below steps.

  • Switch off the printer and take out the power cord from the power outlet.
  • Wait for a minute and then put it again.
  • Now turn on your printer and press the resume key for 10 to 20 sec.
  • Now you will come over a message saying “ reset the printer to its default setting” in the control panel of your device.
  • Click on the ok button and release the resume key.
  • Take a print sample to ensure that error is fixed or not.

Step-3:- Reset the ink cartridge.
If the user still encounter the Epson error 031008 then it directly shows that the issue is with the cartridge or the print head. The ink cartridge is an important part of any printer. If the ink cartridge is not installed correctly, then it led to the Epson printer error 0310058. This error can be erased by resetting the ink cartridge. For resetting the ink cartridge follow this step.

  • Initially power off the printer and remove all the cords and cable attached to it.
  • Now, open the cartridge cover and remove the ink cartridge from the printer.
  • Next, clean it very carefully and smoothly with the dry cotton cloth and then reinsert it.
  • Now click the reset button against all the chip contacts present on the cartridge.
  • Now you will see a bright red light blinking which shows that a strong contact is established between printer and cartridge.
  • Until you see a green LED light start to blink hold the reset button for a sec.
  • Now it indicates you the completion of the cartridge reset process.

Printer Error 031008 on Windows 7, 8, or Windows 10

Epson Error code 031008 occurs on windows 7, 8, or Windows 10 also. Because Epson Error code 031008 is not occurring due to any software code bug or Software issue. It occurs due to improper cartridge installation or not connected USB properly. Epson error code 031008 can be removed by using the above instructions.

Technical Support For troubleshooting the Error Code 031008

You can Fix your error code 031008 by using the above steps. If you are still unable to fix your error code 031008 then you can take the help of the Epson technical support team.

Other Issues And Errors