Canon Printer MX922 Setup

For both your home and office setup, the all-in-one wireless Canon Pixma MX922 is known for its exceptional print quality & other capabilities. Read this page to learn how to set up the Canon MX922 Wireless Printer & troubleshoot some of the common printer problems.

Connect Canon MX922 Printer To Wireless Network | Manual Guide Instructions

• Turn your printer on.
• On the printer’s Control Panel, press the Menu button.
• Select “Device Settings” from the drop-down menu.
• For the Canon MX922 WiFi configuration, select WLAN Settings 
• Change Wireless/Wired can be found by clicking on it.
• and then “OK.”
• Long-press the WPS button on your router for roughly ten seconds once your printer has found a WPS-compatible network router.
• From the list of available network names, select your wireless router (SSID).
• To manually connect the Canon MX922 Printer to WiFi, click on your SSID and enter the network key.
• On the printer’s front panel, select OK.

Canon MX922 Printer USB Setup

To do a USB setup of the MX922 Printer, follow the steps below:

• Firstly both the printer and the computer should be turned on.
• In the CD-ROM drive, insert the MX922 Printer installation driver CD.
• Then from the menu select ” install Canon Pixma MX922″ .
• After that, select “Install” and then “USB Connection.”
• Connect the USB cord to the printer and the computer by clicking “Next.”
• Click “Complete” when the Printer Setup is finished.
• Print a test page using a few sheets of paper loaded into the printer.
• Then “Exit” 

Know more about : Canon Pixma ix6820 Wireless Setup

Canon MX922 Mac Wireless Setup 

Check-ups before initiating the connection

1. Start the printer’s setup procedure.
2. On your computer, download and run the setup file.

• To start the setup process on your printer press the Menu button on it and use the arrow keys to highlight WLAN setup, then, press OK.
• The printer looks for networks in the area. Standard setup is highlighted on a screen. Select OK.

Note: If you’re near a WPS-enabled wireless router, a message will appear instructing you to press the WPS button on the router, then the OK button on the printer. If you don’t want to connect to this router, press the Stop button on the printer.

• The printer looks for networks in the area. Select your network using the up and down arrow keys, then press OK.
• The Enter pass prompt appears if your wireless router has a password. To go to the character entry screen, press OK.

Note: If your wireless network doesn’t have a password, the printer will automatically try to connect to it. Once it has connected, press OK.

Now Download & run the setup file 

• You’ll need to download the drivers and software for your Mac after your printer is connected to the network.
• Visit the PIXMA MX922 support page for more information. Your computer’s macOS® version is detected by the system. If your version isn’t detected by the website, choose it from the Operating System drop-down.
• Select the CUPS printer driver, the MX920 series scanner driver (which includes the Canon IJ Scan Utility), and the ICA driver from the Drivers & Downloads area. To the right of each driver, there is a button, select it. then Download.
• Select the Software tab under Drivers & Downloads when the drivers have downloaded. Choose Select to the right of the Canon IJ Network Tool in the Software section.
• Go to the download folder where your downloads get saved. To open a package file, double-click it. For each file, you download, follow the on-screen directions.
• Select System Preferences from the Apple menu. Then, depending on your Mac OS®, choose Print & Fax, Print & Scan, or Printers & Scanners.
• Select the + (plus sign) in the window’s lower-left corner. Select Add printer or scanner… if a list of printers shows beneath the +.
• Wait for MX922 to appear in the Add window before selecting it. Select Add after ensuring that the Canon MX920 series is chosen in the Use: drop-down.
•  The printer is now connected to your Mac and ready to use

Canon MX922 Windows Wireless Setup 

Check-ups before initiating the connection

1. Make sure your printer is connected to a wireless network using WPS (try this first) or Standard Setup. Once it is done move to step 2.
2. You’ll need the Setup CD that comes with your printer, or you may get the most recent drivers and software by downloading them from the official website.

• Run the downloaded software or the CD that came with your printer.
• Read the connection instructions and select Next.
• The Software Installation List pops up on the screen. (To utilize the printer, MP Drivers must be selected.) The rest of the options are optional). Then select Next
• When using the Setup CD that comes with the printer or the Mini Master Setup from the Canon website, the Software Installation List shows. This screen will not appear if you download the MP Drivers from the website.
• For the license agreement, select Yes.
• Allow the installation procedure to run by selecting Next.
• Next, choose your printer from the Detected Printers List.
• On the Setup Completion screen, click Complete.
• Continue to follow the instructions on the screen. The printer configuration is complete when the Setup Complete screen appears.
• Select Next and go to the few next steps as directed in the process.

Common Issues:

Canon MX922 won’t print!

If the Canon MX922 printer refuses to print, double-check that the printer driver is properly installed. Reconnect the printer to the wireless network and make sure it’s working properly. Check to see whether the toner cartridge has any issues. If this is the case, replace or reinstall them.

FAQ’S