What is error code b200 in canon pix ma printer MG 5320?
Canon pix ma MG 5320 is an efficient and smart printer of the Canon series which facilitates its users with various easy-to-use features for systematic printing, scanning and copying. However, it’s a machine and may be prone to various errors in which the one is error code b200. The b200 error in the canon printer basically arises when the print head is damaged. The role of print head is to give ink to paper from cartridges. Basically, this error can be due to the overheating of print heads also. Whenever you try to print from your printer then you will encounter this issue on the printer’s display.
Causes of canon pix ma printer MG5320 error code b200
- Buying a cheaper printer sometimes creates canon printer error code b200.
- Using foreign cartridges into canon printers creates problems. As the printer can’t cope with cartridges which are not its own.
- Now you need to refill your printer’s cartridge carefully.
- The error on the printer occurred when a paper has been printed and the ink completely empty, in condition if a cartridge is completely empty. Cleaning and checking the print heads will help this error.
- The other cause of this error usually occurs when different formulas of ink have been utilized by the printer. This problem comes when the cartridge is replaced.
Read More-: Fixing Canon Pix Ma Mx432 Printer Error Code 5100
Methods to fix error code B200 canon MG5320
Turn off the printer:
- First you need to open the print head
- Then turn the printer back on, now you will see cartridges start moving to the left.
- Just before the cartridges reach towards the left side, close the printer cover and leave the printer turned on.
Reset your print head:
- Simply turn off your canon printer and leave it off for a few minutes.
- Turn your printer on and see if the error is eliminated or not.
Removing and cleaning of print heads:
- Try cleaning your print heads connectors with cue tips and alcohol.
- Ensure that the connectors are completely dry before powering on your printer.
- Press the power button quickly to initiate the reboot mode on the printer.
Take out all of the ink cartridges:
- Simply lift up the grey bar where the ink goes.
- Turning the printer off, left the print heads in the middle of the printer.
- Clean the plastic head primers/cleaners on the printer.
Replace the problematic cartridge:
- In order to replace the cartridge, you need to check your printer manually.
Check for obstructions:
- For this, you need to power down your canon MG5320 printer.
- Simply, remove the paper from the paper tray and check for any obstructions.
Nozzle check:
- Simply press the power and copy button on your printer and wait for a couple of times.
- After doing that, the printer should start automatically and you just need to perform a nozzle check from its control panel.
Reset the printer:
- In order to remove error code B200 from the printer, first you need to remove the power cord from your printer’s rear and from the main electrical outlet.
- Resetting the ink tanks: When the ink tanks are not seated correctly then there is a possibility that this error may take place.
- Reset the ink cartridges and check if noise is coming or not while placing.
- Also, make sure the printer is being plugged in directly into the wall outlet.
Once done with the above listed solutions now your persisting error gets resolved and if you are still facing any issue then you can take the help of technicians.
Software Technical Phase: In this phase you will need to have an internet connection and administrator access on a computer.
- Firstly you need to manage and check for the updates. As updates, drivers and IJ utility software will help in resolving various errors.
- On windows desktop click on start button after doing this click on devices and printers.
- Right click the canon MP xxx (according your canon code version) and click properties
- Then you need to choose the “maintenance” tab> and then from listed options, select the “deep cleaning” tab.
- When cleaning is done then check the nozzle from the maintenance tab.