HP Envy 7640 Printer won’t Print : Printer Validation Failed is there

What is Printer Validation Failed Error in HP Envy 7640 Printer?

HP envy 7640 is a multi -functional printer. It is an amazing quality printer with high capacity. HP printers can be used for both commercial and household purposes. It is a good printer but sometimes it malfunctions. When there is an HP printer validation failed error, it usually means that there is some obstruction in the printer or the device’s carriage is not moving freely. When the printer is switched on then remove the power cord and from the wall outlet plug the power cord. Remove USB cable, if present. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge. HP printer is a machine and it may face some issues during operations. When users use HP printers they usually face validation failed error, this problem can become restricted while using HP printers. Printer validation failed error occurs when HP printer is not allowed from receiving the command. For help Printer Expert Contact

Causes of Printer Validation Failed Error in HP Printer 

Printer validation failed error can occur in any printer. If this occurs then the HP printer is not going to respond if you give prints commands to your printer. As you get to know about printer validation failed error then there could be many reasons of it:

  1. There can be certain issues such paper jam
  2. Sometimes, you are unable to move the printer carriage smoothly

You May Also Read -: HP Envy 5540 No Longer Printing Color Copies

Ways to Fix Printer Validation Failed Error.

Time needed: 15 minutes

When you observe validation failed messages on your screen you can easily solve this type of problem. For this you have to uninstall and reinstall HP printer driver.

  1. Step : Open the Printer Troubleshooter

    ☑ Open windows 10 troubleshooting which can fix issues. Press windows key + S key to open the search box.
    ☑ Input ‘troubleshoot’ as the keyboard in the search box.
    ☑ To open the troubleshoot tab click on troubleshoot settings.
    ☑ Once done with the above steps you have to click and press on “Run this troubleshooter” option.
    ☑ Then select a printer to troubleshoot.
    ☑ Go to the next button to troubleshoot your problem.

  2. Step : Reset the Printer

    ☑ Reset printer to solve validation failure error. To do this plug our printer and turn on the printer.
    ☑ If there are many USB cables, remove all of them.
    ☑ Wait for 3 to 4 minutes.
    ☑ Press and hold the printer’s power button for about 30 seconds to discharge it.
    ☑ Again plug the printer cable on the wall. After that you have to reconnect the power cord to the rear of the printer.
    ☑ Turn the printer back on.

  3. Step : Reinstall the HP Printer

    ☑ Click the open button option and open text box.
    ☑ In the list select HP printer and control panel features.
    ☑ Go to uninstall and then click yes to confirm.
    ☑ After changing the software start again desktop or laptop.
    ☑ In the text box there will be a control panel entered on it and click ok.
    ☑ In the snapshot click devices and printers to open the window.
    ☑ To uninstall right click on the printer and click to device.
    ☑ To confirm click on the yes button.

  4. Step : On your HP printer scan doctor

    ☑ There would be HP print and scan doctor so click to download button to save HPPSdr.exe to a folder.
    ☑ To open scan doctor and HP printer go to HPPS dr.exe option.
    Select the start button.
    ☑ Click on the next button option when the printer validation failed error comes.
    ☑ Click the printing fix option.

Some Easy Ways to Install the “HP Printer Driver on Windows 10”

  • Search for the full featured HP printer driver from the authorized website.
  • After this, you have to go to the official website and select your country
  • You have to fill the product number in the respective field.
  • Select the operating system on your computer that can be searched via the website.
  • After this, You will setup wizard on-screen to connect your printer
  • At last, you are suggested to perform all the steps to complete the installation process.

In this post we explained Printer Validation Failed Error in HP Envy 7640 Printer, hopefully it is useful now we are discussed another problem which is related to the HP Printer click now for more info- Fixing Printing Blank Pages Issue On HP Printers

Technical support for resolving the issue

In case you have any issues or errors still occurring on screen, then contact HP support assistants Printer Expert Contact. The technicians are available 24/7 you can get in touch with them by dialing the HP number.