Epson workforce 4734 printer connectivity issue
Epson workforce 4734 printer delivers efficient performance while printing commercial and non-commercial documents very efficiently. It works on the Precision Core technology which gives you the laser-like printing quality. You can print your documents very smoothly using this printer. It also offers 500 sheet holding capacity. However it is a machine which may face various issues while operating. In which one is connectivity issue with the computer. During this issue, whenever you will try to connect it to the computer then you may face an error which hinders your work and tasks.
Why Epson workforce 4734 printer is not connecting with the computer?
- There might be chances of a faulty USB cable or loose connection between the printer and the computer.
- Presence of the bad interface card on the printer.
- Selection of the wrong interface.
- The drivers which are installed on the computeris incorrect.
- Installed drivers maybe outdated or corrupted.
RELATED POST: Epson Artisan 1430 printer will not connect to WI-FI
Steps to fix the connectivity issue of Epson workforce 4734 printer with the computer
- First you need to ensure that the printer and the computer are connected properly to the router. If you are not sure, then you can un-plug the router from the printer and from the computer. Wait for a minute, then reconnect it properly and check whether your printer is now connecting to the computer or not.
- You can also use temporary USB cable to connect your Envy workforce 4734 printer to the computer.
- In case of drivers issue, you can try given below steps to fix the issue.
- First you need to uninstall the present printer drivers from your computer and then try to download the updated ones. In order to download the drivers, then you can visit the official website of the HP or you can also go to the product page under the “Download” tab.
- Once done with the download process, your system will automatically configure the updated drivers. Now you need to plug back into your computer and check if it is recognised or not.
- If the connectivity issue is still persists then you can check the selected “Interface type”. For this you need to follow given below steps.
- First go to the printer “Settings” and then check the selected “Interface type”.
- In order to find the “printer”, then first go to the “control panel”.
- Then under the “control panel” tab you will find “Devices and printers” option> now you need to click twice on it to proceed further.
- Once done, now you will get the “printer” option > right-click on it to proceed further.
- Now from the “ports” tab, you need to click on the printers’“properties” option.
- After that you need to ensure that the printer is under the correct port type. If not then select the correct port type.
- Once done, now try to connect again and check whether the issue is resolved or not.
5. In case after changing the interface type you will still face problem in connecting the Epson WorkForce 4734 printer to the computer then you can check whether the USB cable is faulty or not. As there might be some strong chances that the USB cable is faulty. Faulty USB cable hinders the connectivity which may results in the setup failure. Try to use the other USB cable and check whether the issue is resolved or not.
6. If you still facing connectivity issue then you need to check “Interface card”. There might be possibility that the interface card get corrupted. You can use other interface card and then try to connect (Note: Always purchase the genuine interface card).
Technical Support for resolving the error:
In case you are not satisfied with the above mentioned solutions then you can contact on the official website of the Epson Repair Printer. Also you can visit the for further information and assistance about the issue and fixation.