How to Fix Ricoh Printer Error Code SC899

SC899 Error Code Ricoh Printer

Ricoh printers with their Japanese technology aim to serve you the best printing experience. That’s how they found their place in house, schools, offices, and most importantly in customers’ hearts.

Yet there are times when your printer faces difficulty in processing your print commands. This can happen due to several internal mechanical reasons, or external environmental reasons, and even due to wearing out of the parts of your printer. These problems are depicted in the form of errors. And this article will help you to decode the errors, understand the reasons behind them, and the easy troubleshooting methods that you can do on your own without running to a technician. So let us get started.

Ricoh Printer Error Code SC899

Steps to Fix Error Code SC899 on Ricoh Printer

Let us first look at the reasons that cause this error. It is important because by understand the reason you can handle the issue at a deep level. And you can understand a better way to handle your printer for the future use, to keep the errors at bay. So let’s dig into the reasons:

  • When your printer is unable to recognize any print command, it shows up this error, for example- any unrecognized webpage.

Let us troubleshoot the error:

In this section you will find a few troubleshooting ways to deal with Ricoh Printer Error. Please make sure you follow the steps in the right order as they are mentioned. So let’s get started.

Quick fix 1:

By clear the corrupt print job you can get rid of this error. Here is how you can do it:

  • First of all you need to remove the network cable from the printer.
  • Now you need to enter the Ricoh service mode.
  • Please press the reset button.
  • Now press the numeric digit 1.
  • Then press numeric digit ‘0.’
  • And now you need to press the numeric digit ‘7.’

Note: Make sure you press the above numeric keys in the right order as they are mentioned. Do not give any time gap.

  • You need to hold the ‘Clear’ button until you see the SP menu.
  • Press ‘System SP’ button.
  • You will now see a new menu. In that menu please open the ‘SP-5XXX’ option.
  • You need to search for ‘5801- Memory Clear.’ You can do so by scrolling down the menu.
  • Open the ‘5801- Memory Clear’ section.
  • Look for ‘Printer Application’ option and click on it.
  • You will see ‘Execute’ option. Please click on it. This will clear off your printer’s memory and therefore will get rid of the corrupt print command.
  • Once the memory gets cleared, your printer will display a conformation message.
  • Click on ‘Execute’ on the confirmation message too.

Note: Do not click on ‘All Clear’ as this step will erase all the accounting codes from your Ricoh Printer.

  • Once the process is over, your printer will ask you to power off your printer to finish the process.
  • Restart your Ricoh printer.
  • Give your printer a little while to rest.
  • Meanwhile you should clear off the corrupt print command from the computer with the help of the print spooler.
  • After the wait once you will switch on your printer, the error will be gone.

The Scope of Service:

We hope the above step by step solution helped you to resolve the error. Feel free to contact us for further queries at:

  • Contact Ricoh Printer Customer Support phone number SupportRicoh Printer to avail online help.
  • You can also chat with us live.

Other Issues And Errors

Leave a Reply

Your email address will not be published. Required fields are marked *

phone +1(844)-277-9191