How to Fix Lexmark Printer Error 28

Lexmark Printer Error Code 28

Sometimes errors in the printer appear due to our careless mistakes or even due to the mistakes that we commit but are unaware of. One such error is Lexmark Printer Error 28.

Although this error appears to be quite complex due to the coded appearance, but trust us it is very must resolvable. You can resolve this error at your own end with the help of some simple troubleshooting methods. Yes, you don’t need to run to an IT professional to resolve Lexmark Priner Error. In this article you will find all the knowledge and the ways to deal with this error. So let us get started!

Reason Of 28 Error Code Lexmark Printer

Possible cause:

Let us first look into the reasons that cause this error in the first place, before we jump into the troubleshooting methods. It is important to understand the reasons because it gives you a clear picture of the problem area, and it allows you to inculcate good printer maintaining habits for the future use. So, let us look at the reasons here:

  • When the paper gets stuck into the paper input tray of your Lexmark printer, it can result into this error.
  • When there is a paper jam inside the printer, then also it can result in this error.

Troubleshooting of Lexmark Priner Error 28

In this section of the article, let us look into the troubleshooting ways of this error. Just make sure that you follow the given instructions in the given order. So without wasting any more time, let us look at the troubleshooting ways:

Quick Fix 1:

The first solution to resolve this error is to clear off the ‘Area F’ of the printer. Here is how you can do it:

  • Carefully lift the bridge unit assembly door of the printer.
  • Inspect the area for any jammed paper, bits of paper which is stuck in the machine. Carefully remove it.
  • Close the bridge unit assembly door of the printer.
  • On the control panel of the printer click on ‘OK.’
  • Try to resume printing.

Quick Fix 2:

The second solution to resolve this error is to clear off the ‘Area G’ of the printer. Please follow these steps:

  • Carefully open the ‘Finisher front door’ of the printer.
  • On the operator panel the jammed media will be indicated. Please follow the suggestion on the operator panel and get rid of the jammed media.
  • Now close the ‘Finisher front door’ of the printer.
  • On the control panel of the printer click on ‘OK.’
  • Try to resume printing.

Quick Fix 3:

The third solution to resolve this error is to clear off the ‘Area G’ of the printer. Please follow the given instructions:

  • Carefully lift the door ‘H’ of the printer.
  • Inspect the area for any jammed paper, bits of paper, foreign material etc. Carefully remove it.
  • Now close the door ‘H’ of the printer.
  • On the control panel of the printer click on ‘OK.’
  • Try to resume printing.

Quick Fix 4:

Another way to resolve the error is to remove the finishing option. Here is how you can do it:

  • Switch off your printer.
  • Remove the finisher option cables.
  • Take out the Finisher option.
  • Switch on your printer.
  • If the base printing works fine, then you need to replace the finisher.

The Scope of service:

If you still feel the need for any further assistance, please feel free to contact us 24/7 at:

• Call us at Phone Number Lexmark Printer Error Support
• You can also chat live with us.

Leave a Reply

Your email address will not be published. Required fields are marked *

Top
+18666294991