Brother Printer Error Drum

Drum Error With Brother Printer

Printer errors can be quite daunting if you are not aware of the technical troubleshooting ways. You may opt for reaching out to a technician, but we would suggest you to first try to handle the error at your end before running for a professional help. You may be wondering how you can troubleshoot your complex machine. Well, don’t panic, we are here to help you out. This article is especially written to back you up with the DIY troubleshooting methods to rescues your printer from the error message ‘Brother Printer error drum.’

Brother Printer Error Drum

What is Brother Printer error drum error message all about?

It is important to understand what the issue is, before you start to handle it. It is also beneficial to know the reasons behind any error so that you can maintain your printer in a better way for the future use. So let us look at the reasons behind Brother Printer Error:

  • Dirty corona wires of your printer can lead to this error.
  • Incorrect installation of the drum unit or the toner cartridge can be one of the reasons.
  • If the Drum unit assembly is not installed correctly, it can also bring out this error in your machine.
  • Gradual wear and tear of the drum unit can also lead to this error.

How to solve Brother Printer Error Drum?

Let us fix this error message:

Below are some troubleshooting methods that can help you to resolve the error. Make sure you follow the instructions in the order as mentioned.

Quick Fix 1:

Let us look into the ways of cleaning the corona wires of the printer. Please follow these steps:

  • If you were using your printer for a long time, then leave it idle for at least ten minutes so that the internal parts of your printer can cool down.
  • Press the Front cover to release, open it.
  • Carefully remove the drum unit and the toner cartridge out of the machine and place them on some disposable paper to prevent your surroundings from any accidental ink spilling.

Warning:

  1. In case the toner spills on your hand, immediately wash it off with cold water!
  2. DO NOT TOUCH the electrodes of the printer. They contain static current!
  • Now gently slide the green tab of the drum unit to and fro from left to right to clean the corona wires.
  • Now carefully install the drum unit and toner cartridge assembly back into the machine.
  • Close the front cover.

Quick Fix 2:

Let us follow this second solution if the error still persists. Follow these instructions:

  • Leave it idle for at least ten minutes so that the internal parts of your printer can cool down.
  • Press the Front cover to release, open it.
  • Carefully remove the drum unit and the toner cartridge out of the machine.
  • Take out the new toner cartridge.
  • Gently shake it from side to side in order to level the toner inside the cartridge.

Warning:

  1. DO NOT expose the drum unit to a direct sunlight.
  2. Do not refill the toner cartridge which came with your Brother printer.
  • Remove the protective packing of the toner cartridge and immediately install it into the drum unit to prevent any drying of the toner.
  • Green lock lever will automatically lift when you install the toner cartridge properly.

The Scope of Service:

For any further help feel free to reach us at: Printer 24/7 Support Number

  • Call us at Technical Support For Brother Printer for any technical assistance.
  • You can also chat with us live for immediate help.

Leave a Reply

Your email address will not be published. Required fields are marked *

Top
+18666294991